 |
Support structures
mod. PIL
Supporting structure for erection of
protections for road, railways, channel and
existing line crossings |
 |
Working platforms
mod. PLL
The working platforms have
trapezoidal section and they are made of light
aluminium alloy with adjustable steel rope
anti-fall barrier and steel connecting rods. The
platforms can be composed with the modular
elements indicated in the following
table |
 |
Semicircular
working platform mod. PLS 950
Specifically
designed for maintenance works on anchoring and
suspension poles for low and medium voltage
overhead lines. Made of light aluminium alloy
with a foot platform made of anti-slippery
material. It is sustained by two adjustable and
self-supporting anchors connected to the pole
with clearance for the cable |
 |
Light aluminium
alloy ladders mod. SCP
Specifically
designed for climbing poles of circular or
polygonal section. Standard lengths can be
assembled to create the total length
required.
The ladder is made of light
aluminium alloy, provided with anti-slippery
rungs and with special tracks for the anti-fall
device.
|
 |
Triangular section
ladder for towers mod. SCT 950
Specifically
designed for tower climbing complete with
anti-fall device and rope returning system. The
ladder is made of light aluminium alloy, fitted
with anti-slippery rungs, with a special track
for the anti-fall device and with a galvanised
steel supporting hook |
 |
Light aluminium
alloy ladders mod. SCS/SCA |
 |
Antifall devices
mod. SDA
They are individual protective
devices to prevent the operator from falling
down; they are self-guided and self-locking
devices running on a special rigid track and
made of light aluminium alloy. They are provided
with a polyamide mini
energy-absorber and
safety spring catch to connect it to the safety
harness
(e.g. our model DPC 080); the use of
the safety harness is compulsory.
They allow
the proper movement of the operator along the
ladder and, at the same time, they protect him
from falling down. End stroke devices are
provided in order to avoid that the anti-fall
device run away from the anchoring
track.
These devices comply with the
89/686/CEE European Standard related to the
individual protective devices |
 |
Derricks mod.
FAA-FAL
The derricks have been specifically
designed for installation of towers, poles and
vertical structures and they are manufactured in
tubular welded light aluminium alloy or steel
reticular structures.
|
 |
Derricks tables
mod.
FAA-FAL |
