 |
Railways automatic stringing car mod.
CF
Stringing system for contact and
suspension wires in railway lines.
|
 |
Cable remote
control mod. AXC
The cable control
devices allow to operate same controls of the
machine in a different position compared to the
control panel.
In particular the following
controls are granted:
- Setting/programming
of the pull/ tensioning value
- Control of
direction and speed rotation of the
capstans
- Control of Diesel engine rpm
-
Stop all the functions of the
machine |
 |
Radio remote
control mod. AXH
The radio control
devices allow to operate same controls of the
machine in a different position compare to the
control panel, in particular the following
controls are granted:
- Setting/programming
of the pull/tensioning value
- Control the
direction and the speed rotation of the
capstans
- Control the Diesel engine rpm
-
Stop all the functions of the
machine |
 |
Eelectronic pull
and speed recording mod. DLR
Electronic
recorders mod. DLR100 (connected to the machine
by cable) and mod. DLR150 (connected to the
machine by radio modem), are electronic devices
that allow the monitoring of stringing
operations by collecting characteristics
data:
- Applied pull, with the exceeding
control of a limit value;
- Stringing
speed;
- Stringing length. |
 |
Hydraulic power
units mod. CPF 400/CPF 600
These units have
been designed to power tensioners with open
circuit and are suitable to be operated as
pullers.
It is possible to connect the unit
to the tensioner and to the reel winder or reel
stand by hoses and operate them
synchronised.
It is also possible to power
the hydraulic press.
These units can operate
three pieces of equipment at the same
time |
 |
Reel winders mod.
RVA 001
The reel winders are suitable to work
with any hydraulic power unit, in particular
with pullers and puller-tensioners, and operate
as separated winding systems.
They are
equipped with automatic level wind and negative
self-acting hydraulic brake.
The frame is
made of welded steel with protective
coating.
The reel winders can lift the reel
by hydraulic jacks powered by the same hydraulic
source |
 |
Reel winders mod.
RVB 600
The reel winders are suitable to work
with any hydraulic power unit, in particular
with pullers and puller-tensioners, and operate
as separated winding systems.
They are
equipped with automatic level wind and negative
self-acting hydraulic brake.
The frame is
made of welded steel with protective
coating.
The reel winders can lift the reel
by hydraulic jacks powered by the same hydraulic
source |
 |
Triple reel winder
mod. RVB 800
This machine is equipped with three
drums assembled on a trailer and is specifically
designed to string three pilot ropes on three
phases of the same line.
Each drum can be
mechanically connected to the main shaft for
stringing operations |
 |
Cradle reel
elevators mod. CVC
The cradle reel
elevator are made of welded steel with a
protective coating; the frame is completely
detachable to reduce dimensions during
transport |
 |
Mechanical reel
elevators mod. CVM
The reel elevator
are made of welded steel with a protective
coating; the frame is completely detachable to
reduce dimensions during transport. Each reel
elevator is provided with a support with fixed
wedges for wooden reels of conductors and with a
mechanical disk braking system to control the
reel when unwinding the
conductor |
 |
Hydraulic reel
elevators mod. CVI
The reel elevator
are made of welded steel (zinced for Mod. CVI
602), with a protective coating; the frame is
completely detachable to reduce dimensions
during transport. Each reel elevator is provided
with a support with fixed wedges for wooden
reels of conductors and with a mechanical disk
braking system to control the reel when
unwinding the conductor |
 |
Hydraulic reel
elevator heavy duty mod. CVI 600
The reel elevator
are made of welded steel with a protective
coating; the frame is completely detachable to
reduce dimensions during transport.
The reel
elevator include only the main frame with a
mechanical disk braking system and should be
completed with the optional CDR 002 or
CDT |
 |
Reel carrier
trailer mod. CVT 601/CVT 610
The reel carrier
is made of welded steel with protective
coating.
Two hydraulic jacks powered by a
manual pump are used to lift the reel.
Two
disc brakes acting on the reel shaft are
designed to control the unwinding
tension |
 |
Antitwisting
braided rope mod. FUX
Antitwisting
galvanised steel rope, made up of braiding
strands
Advantages:
- high
flexibility
- complete stability to
rotation
- homogeneous distribution of
pressure between the elementary wires
-
increased efficiency during stringing
operations |
 |
Nylon rope mod.
COA
The rope is made up of an external
polyester mesh sock joint and a high strength
nylon core |
 |
Fixed reels mod.
BOF
The reels are made of welded steel
with protective coating.
A detachable side
and the conical drum facilitate removal of rope
or conductor coil
Detachable reels
mod. BOC
The reels are made of welded steel with
protective coating.
Detachable reels have a
detachable
side |
